2018-10-29
New Power Connections on our Custom CubePro

Our Cube Pro Total Conversion: Part 2

In this second part of the Cube Pro Total Conversion blog series, we’ll get our hands dirty. We’ll be replacing most components with ours and start tinkering with the printer. There will be CAD design, assembling, wiring, and configuration required.
2018-10-19
DyzEnd Pro Heat Block

Heater Block Material: A Better Understanding of the Pro Series Hotend Design

The Pro series line of product is designed to push the reliability to a whole new level. Every small feature has been redesigned from bottom-up from based on the feedback we received and our own experience. The heating block undergoes a massive amount of stresses: thermal stress from the heater, pressure stress from the extruder and tension stress from the nozzle. With our intensive tests with high-temperature materials such as PEEK, PEI (Ultem) and PSU, we have realized that this component required a rethinking.
2018-10-03
Dyze Design Pro Series Extruder and Hotend

Introducing our New Pro Series Extruder and Hotend

In the last few years, we wanted to achieve even more in terms of performance and 3D printing quality. So, we worked at developing a new product line. The Pro Series, which includes the DyzEnd Pro hotend and the DyzeXtruder Pro extruder, boasts increased performance compared to its predecessors. Our new Pro Series was officially released at this year’s TCT Show, which was taking place from September 25th to 27th in Birmingham, England.
2018-09-07

Our Cube Pro Total Conversion: A step-by-step guide on how we converted this printer into a more open and functional machine

The Cube Pro is a well-known printer from 3D Systems. We knew this printer had excellent mechanical design and we were interested in buying one. We found a pretty good deal on a non-working unit and decided to buy it. The unit in question had one extruder removed due to malfunction. Learn in this blog series how we managed to convert a non-working Cube Pro into an amazing printer; with open source firmware, high-end components, able to print any materials, and for a fraction of the price of the original printer.
2018-07-10

3D Printer Print Speed Calculation: How to find the optimal speed for reliable and constant print quality

Choosing the right speed for your print can be quite a challenge. After a bit of trial and error, you’ll be able to guess a setting that will generally work. Still, you’ll have a lot of variation with your results. Our print speed calculator has been developed to help you choose the right setting based on our experimental values. This blog will teach you the basics for understanding 3D printer extrusion, how we developed the calculator, and why it can be very useful for you.
2018-06-07
3d Printer Nozzles with showing abrasion and wear

3D Printer Nozzle Abrasion: Discover and understand the mechanisms behind your nozzle wear

It’s getting more and more common to see fiber reinforced polymer as 3D printer material. And as you push your filament through your hotend, pressure is building; as the plastic exits out of the nozzle, many hard fibers are sliding and rolling against the inner wall. This causes Abrasive wear, also referred as ''cutting wear'', ''slurry erosion'' and ''scratching wear''.
2018-02-04

ENP Water Blocks for 3D Printers

Water cooling a 3D printer is an excellent solution for performance, stability, and high-temperature enclosed chambers. We’ve been supporting water cooling solutions since our beginning and it was time for an update. These improvements are based on users reviews and […]
2018-02-04
Filament

3D printing filament size: 1.75mm vs 3.00mm

Choosing a filament size can seem like a tough decision when designing a 3D printer. It is not only a question of personal taste, there are advantages to both standards. Keep reading if you wish to know more. The first […]
2017-03-10

Printing at 300 mm / s – Part 3 – Firmware and tests

This third part will discuss firmware and slicer configuration, real experiments, and prints. Make sure you read the first part which explores the components involved in both speed and acceleration performance and then the second part which explores all the theory […]
2016-11-14

Printing at 300 mm / s – Part 2 – Calculations

This second part will discuss the measurable and calculable limits of the parts explained in Part I. It will be very useful if you want to find the theoretical limits of your machine. Next part will show firmware and slicer […]
X