Thermistor 300°C/500°C
CA$12.00 – CA$33.00
300°C and 500°C Thermistor assembly. Black Sleeve Molex Mini Fit Jr connector, Black Sleeve Molex SL connector or white sleeve (300°C).
Thermistor assembly
See our support section for FAQ and firmware installation guide
500°C – BLACK sleeve With Molex Mini Fit Jr connector
Resistance at 20°C is 5.2 MΩ
Resistance at 400°C is 250 Ω
Firmware adjustment are required, please refer to our support section
500°C – BLACK sleeve With Molex SL connector
Resistance at 20°C is 5.2 MΩ
Resistance at 400°C is 250 Ω
Firmware adjustment are required, please refer to our support section
300°C – WHITE sleeve
Resistance at 20°C is 98.6 kΩ
Resistance at 250°C is 225 Ω
Thermistor is preconfigured in most firmware, please refer to our support section
1 review for Thermistor 300°C/500°C
Related products
-
Select options
PT100 Amplifier Board
CA$36.00 – CA$41.00Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
-
Add to cart
Bowden Kit
CA$7.00PTFE tubing and M8 Pushfit adapter for your Hotend
PTFE tubing and M8 Pushfit adapter for your Hotend
- Add to cart
James Maaskant (verified owner) –
I have perceived stirrings in the wider 3d printing world that these sensors will become the standard. their performance is insane.