Sentinelâ„¢ Filament Detector
CA$50.00
SENTINELâ„¢ is a 3D printer filament detector and cleaner.
Never miss a 3D print again because of an empty spool or dust on the filament. SENTINELâ„¢ is your ultimate filament watchdog.
More than a few user came back to a 3d print job completed but an unfinished object due to lack of raw materials. With SENTINEL™, the days of prints failed due to a lack of filament or dust on the filament are over. SENTINEL™ detect your filament and pause your print.
Works with almost any printer.
1.75mm or 2.85mm
The Sentinelâ„¢ is available for either 1.75mm diameter or for 2.85mm diameter filaments.
Any material
It works with all available materials; flexible, clear, opaque, filled, etc.
Daisy-Chaining
The Sentinel™ filament detector can handle as many filaments simultaneously. As soon as one of them will be missing, the Sentinel™ will send a message to the next one, up to your main board.
Clean Filament
A dust-proof foam ensures there are no intruders getting inside your extrusion system.
Pause Prints
The Sentinelâ„¢ is well integrated within firmware and a pause routine is engaged once there are no more filaments in your printer.
Easy Setup
Follow our well-guided support section and learn how easy it is to install your Sentinelâ„¢.
2 Screws Mounting
Two screws are provided so you can install it where you want.
Parameter | Value | Units |
Supply Voltage | 5 | V |
Current Draw | 31 | mA |
Operating temperature | 0 to +70 | °C |
Fitting Thread | M8x1.25 | mm |
Logic Voltage | 3.3 | V |
Filament Presence | High | Logic |
Related products
-
Sensor Cable Long 1m
CA$6.00Long cable (1 meter) to connect to connect Filament Sentinelâ„¢, Orthusâ„¢ Filament Monitor or Horizonâ„¢ ABL sensor.
-
Sensor Cable Extra Long (2m)
CA$10.00Extra Long cable (2 meters) to connect Filament Sentinelâ„¢, Orthusâ„¢ Filament Monitor or Horizonâ„¢ ABL sensor.