2024-05-30
Pulsar Atom Pellet Extruder mounted on a gantry axis in a 3d printer.
2024-05-30

Flow-To-RPM Factor: Optimize Your 3D Printing with Pellet Extruders

Learn to optimize your 3D printing with pellet extruders. This guide covers key steps for calculating screw speed, determining flow rates, and adjusting RPM for optimal results. Perfect for those transitioning from filament to pellets or enhancing pellet-based print precision. Dive in for practical tips and start fine-tuning your 3D printing process today.
Do you like it?2
0 Read more
2023-03-01
2023-03-01

What is the best Dyze extruder and hotend for your application?

Choosing the right extruder for your 3D printing needs can be a daunting task, especially with the range of options available. In this blog post, we’ll break down the differences between each Dyze Design extrusion systems. We’ll explore the benefits of each one, so you can make an informed decision when selecting the extruder that best fits your needs.
Do you like it?4
0 Read more
2023-02-20
webinar 3d printing
2023-02-20

Webinar – Increase Your Profitability With High-Flow Material Extrusion 3D Printing

Until recently, 3D printing was primarily used for R&D and prototyping purposes. Nowadays, additive manufacturing is proving to be a real manufacturing solution. Industries are using it for small and large series functional mechanical parts or consumer goods. While one of the most used technologies, material extrusion can still be quite time consuming and expensive. In this webinar, we'll discuss how you can increase your profitability in material extrusion 3d printing using modern state-of-the-art high-flow extrusion systems.
Do you like it?10
0 Read more
2023-01-20
Dyze Design DyzeXtruder GT
2023-01-20

The Adverse Effects of PTFE Restrictions

Nozzle clogging and extruder slipping are the main factors causing extrusion problems. But what about restrictions in the PTFE tubing? Might it cause extrusion problems or, in the very least, losses in the extrusion process?  
Do you like it?4
2 Read more
2020-08-14
Dyze Design DyzeXtruder-GT 3D Printer Extruder
2020-08-14

The Ultimate Guide to 3D Printer Extruder

What makes a good extruder? How does it work? We’ll dive into this blog and see how important an extruder is. You’ll understand the challenges in designing a compact, powerful and durable extruder. We’ll also take a look at how we managed to improve our design by taking a deeper look into them.
Do you like it?7
9 Read more
2020-04-08
Pulsar Pellet Extruder Uniform Heating
2020-04-08

Spiral Heaters are the Next Step in 3D Printing

3D printer heaters have evolved over the years, from the NiChrome wire in putty to the heater cartridge. Today, a new generation of heaters has emerged: Spiral heaters, which offers better control and better uniformity.
Do you like it?4
12 Read more
2020-02-05
Dyze Design Liquid-Cooled (water cooled) Hotend and Extruder inside a Cube Pro 3D Printer
2020-02-05

Water Cooling and Peltier Cooling in 3D Printers

Why would you need liquid cooling? How is it any good? Why not use a Peltier cooler? Learn everything we learned about water-cooling in 3d printers since we released our first liquid cooling solution back in 2015.
Do you like it?4
0 Read more
2019-10-17
Dyze Design Custom Cube Pro
2019-10-17

Our Cube Pro Total Conversion: Part 4

A lot of questions were asked in our Cube Pro conversion blog series. We decided to go into more detail about the steps of wiring and finalizing the printer in this new blog part.
Do you like it?2
42 Read more
2019-04-15
2019-04-15

What are the differences between a 12V and 24V 3D printer?

If you are building your own printer, you'll surely have to make a decision between a 12V  or 24V system. One has many advantages over the other, and we'll try to explain why in this small guide. Of course, other voltages exist such as 36V and 48V. We'll also cover where these could be used.
Do you like it?3
7 Read more
123
X