PTFE tube 4mm X 3mm
CA$1.00
4mm OD x 3mm ID PTFE Tubing for 3D Printer and Dyze Design’s Hotend and accessories.
Get the length of tubing of your choice. We will cut it at the desired length. A quantity of one is 100 mm and if you want 300mm, you just need to select QTY 3.
PTFE Tubing – 100mm
Cut to length
3mm ID ; 4mm OD
Ex:
QTY = 2 ; 1 x tube of 200mm
QTY = 6 ; 1 x tube of 600mm
Related products
-
PT100 Amplifier Board
CA$36.00 – CA$41.00Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
-
Heater Cartridge 12VDC/24VDC
Rated 5.00 out of 5CA$9.00Heater Cartridge 12v 45W and 24v 60W
Heater Cartridge 12v 45W and 24v 60W
-
DyzEnd-X/DyzEnd Pro ENP Liquid Cooling Block
Rated 5.00 out of 5CA$48.00Electroless Nickel Plating (ENP) Liquid cooling block for DyzEnd-X/DyzEnd Pro hotends.
Electroless Nickel Plating (ENP) Liquid cooling block for DyzEnd-X/DyzEnd Pro hotends.
Reviews
There are no reviews yet.