PTFE tube 4mm X 2mm
CA$1.00
PTFE Tubing for 3D Printer and Dyze Design’s Hotend.
PTFE Tubing – 100mm
Cut to length
2mm ID ; 4mm OD
Ex:
QTY = 2 ; 1 x tube of 200mm
QTY = 6 ; 1 x tube of 600mm
Related products
-
PT100 Amplifier Board
CA$36.00 – CA$41.00Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
-
Thermistor 300°C/500°C
Rated 5.00 out of 5CA$12.00 – CA$33.00300°C and 500°C Thermistor assembly. Black Sleeve Molex Mini Fit Jr connector, Black Sleeve Molex SL connector or white sleeve (300°C).
300°C and 500°C Thermistor assembly. Black Sleeve Molex Mini Fit Jr connector, Black Sleeve Molex SL connector or white sleeve (300°C).
-
PushFit – 6mm Tube Through
CA$7.00M8x1.25 PushFit for 6mm OD tubing
M8x1.25 PushFit for 6mm OD tubing
Reviews
There are no reviews yet.