-
Select options
Heat Block replacement
CA$12.00 – CA$41.00DyzEnd-X Hotend Replacement Part. Used to replace the heater block.
DyzEnd-X Hotend Replacement Part. Used to replace the heater block.
-
Select options
Heat Break Replacement
CA$14.00 – CA$28.00Heat Break Replacement Part for DyzEND-X and DyzEnd Pro Hotends.
Heat Break Replacement Part for DyzEND-X and DyzEnd Pro Hotends.
-
Add to cart
Heater cable
CA$6.00Extension cable for heater with connectors
Extension cable for heater with connectors
-
Select options
High Temperature Tubing 9.53 OD / 7.94 OD
CA$12.00Tube for Dyze Design water cooling blocks
Tube for Dyze Design water cooling blocks
-
Add to cart
Horizon™ Auto Bed Leveling Sensor
CA$130.00Horizon™, a new generation auto-bed leveling (ABL) sensor, collision detector and basic z axis endstop switch.
Horizon™, a new generation auto-bed leveling (ABL) sensor, collision detector and basic z axis endstop switch.
- Add to cart
-
Select options
Kit DyzEND Pro + DyzeXtruder Pro 1.75mm
CA$430.00Dyze Design’s Pro SerieExtruder & Hotend kit: High performance, high speed, high flow, high-temperature, and high pushing force. Equipped with an ultra wear resistant nozzle in tungsten carbide.
Dyze Design’s Pro SerieExtruder & Hotend kit: High performance, high speed, high flow, high-temperature, and high pushing force. Equipped with an ultra wear resistant nozzle in tungsten carbide.
-
Add to cart
Latch Groove Mount (DyzeXtruder GT)
CA$7.00Groove Mount Latch Replacement for DyzeXtruder-GT extruder
Groove Mount Latch Replacement for DyzeXtruder-GT extruder
-
Select options
Liquid Cooling Block Fitting
CA$11.00Fitting for Dyze Design’s Electroless Nickel Plating (ENP) Liquid Cooling Block.
Fitting for Dyze Design’s Electroless Nickel Plating (ENP) Liquid Cooling Block.
-
Add to cart
Liquid Cooling Block Stop Plug
CA$7.00Stop Plug for Dyze Design’s Electroless Nickel Plating (ENP) Liquid Cooling Block.
Stop Plug for Dyze Design’s Electroless Nickel Plating (ENP) Liquid Cooling Block.
-
Add to cart
Motor Cable
CA$6.00Extension cable for stepper motor with connectors
Extension cable for stepper motor with connectors
-
Add to cart
Nema 23 Stepper Motor ENP Liquid Cooling Block
CA$65.00Electroless Nickel Plating (ENP) Liquid Cooling Block for Nema 23 Stepper Motors.
Electroless Nickel Plating (ENP) Liquid Cooling Block for Nema 23 Stepper Motors.
-
Select options
Orthus™ Filament Monitor
CA$125.00Orthus™, an ultra-precise filament monitoring sensor enabling instantaneous detection of both filament runout and jam.
Orthus™, an ultra-precise filament monitoring sensor enabling instantaneous detection of both filament runout and jam.
-
Select options
PT100 Amplifier Board
CA$36.00 – CA$41.00Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
Connect a PT100 temperature sensor to your 3d printer controller using this circuit. Amplifies the signal from the PT100 to a voltage level that your printer can interpret precisely.
-
Add to cart
PT100 Temperature Sensor
CA$35.00PT100 Temperature sensor for DyzEnd-X Hotend
PT100 Temperature sensor for DyzEnd-X Hotend
-
Add to cart
PTFE tube 4mm X 3mm
CA$1.004mm OD x 3mm ID PTFE Tubing for 3D Printer and Dyze Design’s Hotend and accessories.
4mm OD x 3mm ID PTFE Tubing for 3D Printer and Dyze Design’s Hotend and accessories.
-
Add to cart
PushFit – 4mm Tube Through
CA$5.00M8x1.25 PushFit for 4mm OD tubing
M8x1.25 PushFit for 4mm OD tubing
-
Add to cart
PushFit – 6mm Tube Through
CA$7.00M8x1.25 PushFit for 6mm OD tubing
M8x1.25 PushFit for 6mm OD tubing
-
Add to cart
Reduction Gear Replacement
CA$14.00Reduction Gear Replacement Part for DyzeXtruder-GT extruder.
Reduction Gear Replacement Part for DyzeXtruder-GT extruder.
-
Add to cart
Sensor Cable Extra Long (2m)
CA$10.00Extra Long cable (2 meters) to connect Filament Sentinel™, Orthus™ Filament Monitor or Horizon™ ABL sensor.
Extra Long cable (2 meters) to connect Filament Sentinel™, Orthus™ Filament Monitor or Horizon™ ABL sensor.
-
Add to cart
Slave Gear Replacement
CA$10.00Slave Gear Replacement for your DyzeXtruder
Slave Gear Replacement for your DyzeXtruder
-
Select options
Thermistor 300°C/500°C
CA$12.00 – CA$33.00300°C and 500°C Thermistor assembly. Black Sleeve Molex Mini Fit Jr connector, Black Sleeve Molex SL connector or white sleeve (300°C).
300°C and 500°C Thermistor assembly. Black Sleeve Molex Mini Fit Jr connector, Black Sleeve Molex SL connector or white sleeve (300°C).
-
Select options
Tungsten carbide nozzle
CA$75.003D printer nozzle in tungsten carbide for the ultimate balance between wear resistance and high performance.
3D printer nozzle in tungsten carbide for the ultimate balance between wear resistance and high performance.
-
Select options
Tungsten carbide nozzle (high flow)
CA$75.003D printer nozzle in tungsten carbide for the ultimate balance between wear resistance and high performance.
3D printer nozzle in tungsten carbide for the ultimate balance between wear resistance and high performance.
- High-Flow Systems
-
-
Typhoon™ 2.85 Filament Extruder
-
Pulsar™ Pellet Extruder
-
-
- Blog
-
Recent Posts
- What is the best Dyze extruder and hotend for your application?
Webinar – Increase Your Profitability With High-Flow Material Extrusion 3D Printing
The Adverse Effects of PTFE Restrictions
How the Pulsar™ pellet extruder improved art & architectural design fabrication- Plastic Pellets Mixing: Can the Pulsar™ extruder mix polymers while extruding?
-
