Horizon™ Auto Bed Leveling Sensor
CA$130.00
Horizon™, a new generation auto-bed leveling (ABL) sensor, collision detector and basic z axis endstop switch.
The Horizon™, for all practical purposes, transforms your nozzle into a very sensible force sensor.
This permits very accurate Z homing of your bed without any risk of damaging your printer as the Z motors will be stopped the instant your nozzle touches the bed.
Horizon™ can be used as a basic z axis endstop switch or as an auto-bed leveling (ABL) sensor.
The Horizon also provides an analog output proportional to the force applied on the nozzle that could be used in other contexts where you would need a sensitive force sensor for your 3d printer.
Specifications
| Specifications | ||||
|---|---|---|---|---|
| Min | Typical | Max | Unit | |
| Voltage | 3.3 | 5 | 6 | V |
| Current | 15 | 28 | 35 | mA |
| Output logic | 3.3 | High/low | 6 | V |
| Output analog | 0 | 3 | V | |
| Detection force | 0.69 | N | ||
| Temperature | 0 | 21 | 40 | ℃ |
| Mounting hole | M3 | mm |
Output table:
| Contact on the bed detected | Logic | Red LED |
|---|---|---|
| NO | HIGH (Vin) | OFF |
| YES | LOW (0V) | ON |
Labels and indicators:
- The straight arrow indicates the upwards direction.
- The “DIGITAL” label indicates which connector outputs a digital signal (switch type)
- The “ANALOG” label indicates which connector outputs an analog signal (real-time reading of the vertical force applied on the nozzle)
- The LED indicates power and contact with the bed. A red LED indicates contact with the bed. See the preceding “Output table” for better understanding
Please read our documentation at https://docs.dyzedesign.com/horizon.html for more technical information.
Related products
-
Filament Sentinel Circuit Board
CA$17.00Circuit Board replacement for the Sentinel™ filament detector.
-
DyzeXtruder GT/Pro Motor
CA$28.00Motor replacement for DyzeXtruder GT and DyzeXtruder Pro extruders.
Reviews
There are no reviews yet.