Liquid Cooling

Liquid Cooling

Basic liquid cooled system guidelines


Here are some guidelines when using a liquid cooling system.   PumpAt least 300 L/h Always running when the printer is Preferable with a reservoir  Radiator80mm radiator is enough for a DyzEnd and...

Liquid cool your DyzEnd or DyzEnd-X


1Remove the fanUse a 2mm allen wrench and remove the 4 screws holding the fan. 2Apply thermal pasteApply thermal paste on your heatsink. 3Install the liquid cooling blockUse a 2mm allen wrench and install the...

Liquid cool your DyzeXtruder or DyzeXtruder-GT


1Remove the screwsUse a phillips screw driver and remove the 4 screws holding the back bell of the stepper motor. Do not remove the motor back bell.2Apply thermal pasteApply thermal paste on the back bell of the stepper...

$15 Flat Rate Shipping for USA & Canada - Worldwide Free Shipping over $500* Dismiss

X